I have 100k :)

And spent 90k :(

Mo magic

Per each fail

Road scrape is out

Lol white people

crazy wide wide screen

Speak of the devil

N#ggers

people who annoy me:

isn't that an old tag?

there I fixed it

Futurama!

homer through a big party and everybody was there.

everyone except Flanders, who was not invited. Lol

Covington sonic you have failed me again

$0.99 route 44 are a $1.09?

Forced Companionship

good idea jr...

i'm just crazy enough to do it...

longer:


or shorter:

Was and is...

I knew this wasn't Bryan!

Duches

got a little cold in the truck last night

I hate ice cold water

Ion Storm

When i went to Dallas Texas in 2007, i stayed in Adams Mark,which is now known as the Sheraton. Left is the shot from the hotel, right is Google earth's same shot.



I just learned, when John Romero left id software, he created Ion Storm in the penthouse office of the Chase tower. i started looking on Google earth for where that building was, and sure enough, I stayed next door. I even took a picture of that building! (Jan '07 - approx 10 years after Ion Storm took up this penthouse suite)

Wasn't Casey Antony found innocent?

there's a reason so much chocolate mint candy left over, nobody likes it

I think Brittany got my fortune...

Arduino camera flash countdown code

// code loosly based on http://arduino.cc/en/Tutorial/BlinkWithoutDelay // wiring of the remote came from http://www.instructables.com/id/Homebew-Wired-SONY-ALPHA-Remote/ // which pins do what int led1 = 5; int led2 = 2; int led3 = 3; int led4 = 4; int flashpin = 12; int focuspin = 11; // all the random variables int flashed = 1; //has it flashed yet? long flashtime = 0; //what time should it flash? long led1time = 0; //when will led1 go off? long led2time = 0; //when will led2 go off? long led3time = 0; //when will led3 go off? long led4time = 0; //when will led4 go off? long time; //used to grab the millis void setup() { Serial.begin(9600); //used for troubleshooting // initialize the digital pins as outputs. pinMode(led1, OUTPUT); pinMode(led2, OUTPUT); pinMode(led3, OUTPUT); pinMode(led4, OUTPUT); pinMode(flashpin, OUTPUT); pinMode(focuspin, OUTPUT); pinMode(13, OUTPUT); //used for troubleshooting - would make pin 13 light instead of firing the camera } void loop() { if(flashed == 1) { time = millis(); //take a time reading flashtime = time + 8000; //now + 8 seconds it will flash led1time = time + 8000; //now + 8 seconds the last led will go out led2time = time + 7000; //now + 7 seconds the 2nd led will go out led3time = time + 6000; //now + 6 seconds the 3rd led will go out led4time = time + 5000; //now + 5 seconds the first led will go off, to signify the countdown digitalWrite(led4, HIGH); //turn all leds on digitalWrite(led3, HIGH); digitalWrite(led2, HIGH); digitalWrite(led1, HIGH); digitalWrite(flashpin, HIGH); //redundant, technically not needed... (maybe for first go round, before first flash?) digitalWrite(focuspin, HIGH); //redundant, technically not needed... flashed = 0; //start the "you haven't flashed so start the countdown" 'if' :) } //flashed end else { time = millis(); if(time > led4time) digitalWrite(led4, LOW); //start the countdown! if(time > led3time) digitalWrite(led3, LOW); // 3... if(time > led2time) digitalWrite(led2, LOW); // 2... if(time > led1time) digitalWrite(led1, LOW); // 1... if(time > flashtime) { digitalWrite(focuspin, LOW); //focusing (even if on manual focus - plus, if the focus pin is perma-focused, you can't review the pics, nor change any shutter type settings)... delay(400); digitalWrite(flashpin, LOW); // FLASH! digitalWrite(13, HIGH); //led on-board lights, showing visibal progess incase the camera didn't delay(400); //this was a good delay for my camera. 200 was too fast, any longer might fire more photos) digitalWrite(flashpin, HIGH); //stop flashing digitalWrite(focuspin, HIGH); //stop focusing digitalWrite(13, LOW); //turn off led flashed = 1; //you have flashed, start the countdown over again! } //flash end } //else end //Serial.print("time:"); Serial.print(time); Serial.print(" led1time:"); Serial.print(led1time); Serial.print(" flashtime:"); Serial.println(flashtime); // the above was useful when it wasn't flashing, nor were my leds going off. it showed the current time, when one of the leds was supposed to go off, and when it was supposed to flash. } //loop end

Jr raving

I guess it got a little cold in the truck last night

it's hot enough to be riding around with the windows down :-)

this annoys me so bad

pull up to the sign and two people can be helped at once.

Dear sonic

why do you charge a dime to flavor a non flavored drink? why not charge an extra dime for a sprite because I got the sprite flavor in it?

Risk takers

Jr your dad should do this to his truck!

Bike sharrows?

The tp at Wbjh...

Schools for who?

Roberts broken phone

Really phone?

Tree in my driveway

Oops. Apparent all 4 aren't needed?

I got junior a rice krispie treat!

can I use them for my dead hooker removal?

I hate this f'ing traffic light

Jumping on the band wagon

its fullen's mom

if you ain't first you're last

Stupid phone

Me kitty!

2 accidents at nearly the same intersection.

dump truck 1 cars 0